Please accept our apologies. We know you count on our service and expect better from us. We are working non-stop to return iAquaLink to normal operation and earn back your confidence.
A frequent question we have received is “How do I control my pool automation system without the app?” Below you will find instructions for basic on/off functionality of some pool features, (manually turning on or off the filter pump, lights, etc.) from your AquaLink power center.
We know that this doesn’t give you everything you’re looking for… but we’re on it.
AquaLink RS or AquaLink PDA (metal power center)
1. Go to your AquaLink Power Center and open the door (if a plastic power center use the LCD Screen).
2. Put the system into TIME OUT mode by pushing the button on the left two times (from AUTO mode).
3. This will allow you to manually turn on (and turn off) most equipment you have on your pool pad such as the pump, heater, lights, spa, etc.
NOTE: When in service mode, your schedules will not run. Time out mode will go back to Auto mode after three hours, ensuring that normally scheduled features operate according to schedule. The iAquaLink outage does not impact scheduled operations, as all schedules are stored locally, not in the cloud or iAquaLink servers.
AquaLink Z4 (plastic power center)
For AquaLink Z4 systems, all features and settings can be adjusted through the digital control panel typically found on the front door of the power center.
Note: The iAquaLink outage does not impact scheduled operations, as all schedules are stored locally, not in the cloud or iAquaLink servers.
If you have any questions please contact us at: